Paket beryl untuk slackware 12

barusan sy coba install di Slack-12 yang masih perawan,
tinggal di installpkg *.tgz, plus konfigurasi X server ... beryl langsung jalan dengan mulus...

bravo ...

saya pake slackware 12 mas denic, cara saya nginstall beryl sama persis dengan yang di-post mas arman di atas. Apakah saya perlu nginstall paket2 gnome dulu ya? soalnya setahu saya slackware 12 tidak lagi menyertakan gnome.

Pertama saya coba install dropline-gnome, eh..boro2 mau jalankan beryl, gnome-nya sendiri gak jalan..akhirnya saya install ulang slackware dan coba install lagi beryl...dan akhirnya...wuih beryl jalan juga..senangnya hatiku!!
terima kasih buat kk2 sekalian atas bantuannya..

kenapa ya kalo beryl di tempat saya, jalannya agak kurang normal
contoh : Title bar menghilang, emerald themes ga bisa, desktop 3d ga bisa juga (atau mungkin saya-nya yang tidak bisa) :)
saya menggunakan paket beryl dari makassar-slacker

ini error waktu aku menjalankan beryl-manager :

beryl-manager:7390): Gtk-CRITICAL **: gtk_check_menu_item_set_active: assertion `GTK_IS_CHECK_MENU_ITEM (check_menu_item)'failed

** (beryl-manager:7390): WARNING **: No pidof, this may not work right.

** (beryl-manager:7390): WARNING **: No pidof, this may not work right.

** (beryl-manager:7390): WARNING **: No pidof, this may not work right.

** (beryl-manager:7390): WARNING **: No pidof, this may not work right.

**************************************************************
* Beryl system compatiblity check *
**************************************************************

Detected xserver : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Checking for non power of two texture support : passed
Checking maximum texture size : passed (4096x4096)

Relaunching beryl with __GL_YIELD="NOTHING"
**************************************************************
* Beryl system compatiblity check *
**************************************************************

Detected xserver : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Checking for non power of two texture support : passed
Checking maximum texture size : passed (4096x4096)

Reloading options
beryl: No GLXFBConfig for depth 32
beryl: No GLXFBConfig for depth 32
beryl: No GLXFBConfig for depth 32
beryl: Failed to load slide: /home/robb/hotcorners_racarr.svg
beryl: Failed to load slide: /home/robb/hotcorners_racarr.svg
beryl: dbus_bus_get error: Failed to execute dbus-launch to autolaunch D-Bus session
beryl: Plugin 'dbus':initDisplay failed
beryl: Couldn't activate plugin 'dbus'
Couldn't initialise dbus. This should not happen!
beryl: Plugin 'showdesktop' can't be activated because plugin 'fadeDesktop' is already providing feature 'showdesktop'
Couldn't initialise showdesktop. This should not happen!

saya menggunakan VGA NVIDIA EN6600 LE.
di bagian xorg.conf sudah saya tambahkan :


Section "Extensions"
Option "Composite" "Enable"
EndSection


mohon bantuannya nih :)

Sebelumnya saya telah berhasil konfigurasi beryl di slackware 12 dan berjalan dengan baik.
Lalu setelah saya browsing2, ternyata di compiz ada effect untuk paint fire on screen
Nah saya telah mendownload file COmpizExtraPlugin
nah saya ingin menggunakan effect firepaint ini dengan beryl dimungkinkan ga ya ? Jika dimungkinkan, mungkin bisa dibantu bagaimana caranya ?

mohon bantuannya :)

mas arman, beryl dah jalan tapi title bar ilang n emeraldnya tdk jalan!

mohon bantuannya

ghe

Mas, mohon bantuan buat setting beryl pake radeon X200.

ini sebagian file xorg.conf ku
---------------------------------------------------------

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/lib/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/cyrillic/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
#Load "speedo"
Load "dri"
Load "glx"
Load "GLcore"
Load "drm"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
Identifier "Keyboard1"
Driver "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" #diganti
# The mouse device. The device is normally set to /dev/mouse,
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 31.5 - 50.0
VertRefresh 40.0 - 90.0
EndSection

Section "Device"

#VideoRam 4096
# Insert Clocks lines here if appropriate
Identifier "VESA Framebuffer"
Driver "radeon"
# BusID ""
# VendorName "ATI Technologies Inc."
# BoardName "ATI Radeon X200 Express PCIE"
Option "DRI" "true"
Option "TripleBuffer" "true"
Option "RenderAccel" "true"
Option "XAANoOffscreenPixmaps" "true"
Option "ADDARGBGLXVIsuals" "true"
Option "AllowGLXWithComposite" "true"
Option "DisableGLXRootClipping" "true"
Option "EnablePagerFlip" "on"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
# DefaultDepth 16
# DefaultDepth 32
# "1024x768" is also a conservative usable default resolution. If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
# Option "RENDER" "Enable"
# Option "DAMAGE" "Enable"
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

---------------------------------------------------------
waktu dicoba pake glxinfo, muncul pesan :
Xlib: extension "XFree86-DRI" missing on display ":0.0".
direct rendering : No

Kira2 apa yang salah?
(Maklum mas masih newbie)
Radeon X200, wuih sulit banget setting Beryl

Setting Xorg.conf Intel X3100
Saya kan udah download paket beryl yang mas bikin. Petunjuk yang ada disini sudah saya ikutin. Trus pas saya ketik beryl | emerald --replace &. Yang ada di desktopnya tulisan dan yang lainnya pada hilang semuanya jadi blank screen tapi pointer mousenya masi ada. Trus pas saya gerakin mousenya ke pojok atas layar screennya berubah seperti milih window gitu. Tapi gak ada tampilan apa - apa cuma iconnya aja. Sumua layarnya gak ada gambar ato tulisannya. Solusinya gimana ya mas, ato Xorg.conf nya gak bener y? saya pake Acer Aspire 4920 Vganya X3100. Mohon pencerahannya ya mas. Terima kasih

kok link nya ga ada mas,,,
mau download paket beryl nya,,,